• We are now running on a new, and hopefully much-improved, server. In addition we are also on new forum software. Any move entails a lot of technical details and I suspect we will encounter a few issues as the new server goes live. Please be patient with us. It will be worth it! :) Please help by posting all issues here.
  • The forum will be down for about an hour this weekend for maintenance. I apologize for the inconvenience.
  • If you are having trouble seeing the forum then you may need to clear your browser's DNS cache. Click here for instructions on how to do that
  • Please review the Forum Rules frequently as we are constantly trying to improve the forum for our members and visitors.

3" S&W .44 Magnum

WalkingWolf

Regular Member
Joined
Jul 31, 2011
Messages
11,930
Location
North Carolina
Definitely would appear so.

There is a reason that many old revolvers like this were loaded 'five beans in a barrel' = hammer down on an empty cylinder.

Yes they are SA, but since they are centerfire, instead of rimfire, the firing pin can be rested between case heads. Which case they can be loaded fully safely. If dropped the FP cannot strike a primer. Many of the early rimfires, and of course the cap, and ball did not have that option so they were carried with an empty chamber. Except for the 58 Remy which has a hammer notch between each chamber.
 

Grapeshot

Legendary Warrior
Joined
May 21, 2006
Messages
35,317
Location
Valhalla
Yes they are SA, but since they are centerfire, instead of rimfire, the firing pin can be rested between case heads. Which case they can be loaded fully safely. If dropped the FP cannot strike a primer. Many of the early rimfires, and of course the cap, and ball did not have that option so they were carried with an empty chamber. Except for the 58 Remy which has a hammer notch between each chamber.

Sounds like you have been there and done that. Appreciate the insight.

You just added to my knowledge base, such as it is.
 

Citizen

Founder's Club Member
Joined
Nov 15, 2006
Messages
18,269
Location
Fairfax Co., VA
Yes they are SA, but since they are centerfire, instead of rimfire, the firing pin can be rested between case heads. Which case they can be loaded fully safely. If dropped the FP cannot strike a primer. Many of the early rimfires, and of course the cap, and ball did not have that option so they were carried with an empty chamber. Except for the 58 Remy which has a hammer notch between each chamber.

And, the Old Army '72.

:)

http://www.ruger.com/service/productHistory/RE-OABP.html
 

Grapeshot

Legendary Warrior
Joined
May 21, 2006
Messages
35,317
Location
Valhalla
Yes it is another reason I having a hard time buying one.

Stash funds in secret - buy it.

Don't tell your significant other or lie about it - you've had it forever. Put it in the back corner of your safe and privately name it "Queenie." :lol:

Do these also if you enjoy pain. :p
 

Freedom1Man

Regular Member
Joined
Jan 14, 2012
Messages
4,462
Location
Greater Eastside Washington
Stash funds in secret - buy it.

Don't tell your significant other or lie about it - you've had it forever. Put it in the back corner of your safe and privately name it "Queenie." [emoji38]

Do these also if you enjoy pain. [emoji14]
There is a list of thing just wrong with you Grapeshot. Queeny, pain x what else are you into?


Also if you are going to get a single action revolver, spend the extra and get a Freedom Arms. My friend had never shot the forcing cone out of one of those. He has had to send other brands back to have the cone re-machined more than once though.

Sent from my SM-G386T using Tapatalk
 

solus

Regular Member
Joined
Aug 22, 2013
Messages
9,315
Location
here nc
There is a list of thing just wrong with you Grapeshot. Queeny, pain x what else are you into?


Also if you are going to get a single action revolver, spend the extra and get a Freedom Arms. My friend had never shot the forcing cone out of one of those. He has had to send other brands back to have the cone re-machined more than once though.

Sent from my SM-G386T using Tapatalk

Braces...wide braces

ipse
 

Grapeshot

Legendary Warrior
Joined
May 21, 2006
Messages
35,317
Location
Valhalla
The longer the barrel, the greater the potential for being on target....even when up close and personal.

Still anything over 6" can be a disadvantage in most cases - maybe not in hard core hunting.
 

MSG Laigaie

Campaign Veteran
Joined
Jan 10, 2011
Messages
3,241
Location
Philipsburg, Montana
I think that with full power loads in the Redhawk, or the 629 gloves would be a good idea.

I ride a motorcycle........a lot. So, I wear gloves, a lot. In order to "fight the way I train", I always shoot my EDC with gloves on. It does make enough of a difference that I needed to incorporate it in my range fire.

There is a reason that many old revolvers like this were loaded 'five beans in a barrel' = hammer down on an empty cylinder.

I, just recently, purchased a SA Ruger Super Blackhawk in .44mag. It has a transfer bar allowing a six round load. It surely does not fit in the "short barrel" category with its 7.5 inch tube.

Love the Schofield and would like to have a center fire Le Mat.
 

Firearms Iinstuctor

Regular Member
Joined
Jul 12, 2011
Messages
3,433
Location
northern wis
Stash funds in secret - buy it.

Don't tell your significant other or lie about it - you've had it forever. Put it in the back corner of your safe and privately name it "Queenie." :lol:

Do these also if you enjoy pain. :p

Wife doesn't care what guns I buy, she hasn't said any thing after the first few dozen.

Schofield's are one very neat revolver. One of these day I just might say the heck with it and buy one.
 
Last edited:

The Truth

Regular Member
Joined
Jul 18, 2014
Messages
1,972
Location
Henrico
Stash funds in secret - buy it.

Don't tell your significant other or lie about it - you've had it forever. Put it in the back corner of your safe and privately name it "Queenie." :lol:

Do these also if you enjoy pain. :p

Not as easy as it sounds.

My plan is, "I got it for $300! Couldn't pass it up!" Then proceed to hand her a Benjamin in hopes it will distract her. Usually does the trick, haha.
 

Citizen

Founder's Club Member
Joined
Nov 15, 2006
Messages
18,269
Location
Fairfax Co., VA
Not as easy as it sounds.

My plan is, "I got it for $300! Couldn't pass it up!" Then proceed to hand her a Benjamin in hopes it will distract her. Usually does the trick, haha.

:)

Years ago, Reader's Digest ran an anecdote in their column, "Life in the United States".

Seems a husband dutifully held his wife's purse in a department store while she shopped for clothes. This went on for some time. He never uttered a complaint.

At the check-out counter, a female clerk complimented him as the most patient husband she had ever seen. He replied:

"Well, I bought a pick-up truck yesterday."

:D
 

The Truth

Regular Member
Joined
Jul 18, 2014
Messages
1,972
Location
Henrico
The lead on VGT turned out to be legitimate, and the guy seems to be a very well trusted trader, but it has an unfluted cylinder :( Nice, rare gun though. Wish I had the bones. It's becoming clear I may not be able to afford a blue version...
 

Grapeshot

Legendary Warrior
Joined
May 21, 2006
Messages
35,317
Location
Valhalla
The lead on VGT turned out to be legitimate, and the guy seems to be a very well trusted trader, but it has an unfluted cylinder :( Nice, rare gun though. Wish I had the bones. It's becoming clear I may not be able to afford a blue version...
If I'd had enough in the kitty bank, I might have told you about the find I just picked up for the buy-it-now price. :p

Unfortunately, discretionary funds are in short supply right now.
 

solus

Regular Member
Joined
Aug 22, 2013
Messages
9,315
Location
here nc
eyes bigger than the pocketbook syndrome, eh??

hate when that occurs...

ipse
 
Top